The sargassum has arrived, and a smell settles in. Is it just unpleasant? What does the number on a monitoring bulletin mean? When you live near the coast, you need clear answers. Here are some ways to understand what happens after a stranding, and where SargaTrack fits into coastal monitoring.
Behind every reading, you need to know the gas, the location and the measurement period.
General information, not a diagnosis or a real-time alert. Follow the instructions of local authorities. The French guidance below is not a set of regulations shared by the whole Caribbean.
Biomass decomposes and gases are released
Once seaweed accumulates, microorganisms continue to break it down. When oxygen is scarce, this process can produce hydrogen sulphide (H₂S). Ammonia (NH₃) is another gas associated with sargassum decomposition. The names may sound technical, but they refer to substances that monitoring organisations seek to measure in the air. [1]
H₂S can be toxic when inhaled. Its characteristic smell is not a measuring instrument: your sense of smell can become unreliable, particularly at high concentrations. Ammonia irritates the eyes and airways. Effects depend on exposure; the strength of a smell, the colour of a mat or the area it covers cannot be used to calculate a concentration. [2][3]
What about liquids draining from the seaweed?
Leachate is liquid that drains from or passes through a material, carrying some of its substances with it. Around a sargassum storage site, it matters where that liquid goes: into the soil, groundwater or towards the shore? This is a separate issue from gases in the air and requires different sampling and analysis. [4]
BRGM studied storage sites in Martinique and documented concerns involving arsenic and, at some sites, chlordecone. This does not mean that all Caribbean sargassum contains the same contaminants. Arsenic is a metalloid that seaweed can accumulate; decomposition does not create it. Where the biomass comes from, laboratory analyses and storage conditions remain essential. [4]
That variability explains why appearance alone cannot determine whether biomass is suitable for agricultural use or other reuse. Anses describes variable composition and the possible presence of trace metals. Batches need to be characterised and the requirements for the intended use checked before reuse. Natural does not mean suitable for use without checks. [5]

A reading in ppm: what does it tell us?
For a gas in air, ppm means parts per million by volume. Before interpreting a reading, check the gas, location, time and measurement period. A brief peak is not a 24-hour average. If a bulletin gives values in mg/m³, take care: conversion to ppm depends on the gas concerned. [6]
A sensor tells us about what it measures where it is located, not automatically about the air in every nearby home. Maintenance and possible interference matter too. Make a habit of checking the date of the latest reading: an old or missing value does not mean zero gas. It is a simple but essential detail when reading monitoring information. [7]
French Antilles: guidance for the public
This summary of the HCSP's 2018 messages uses 24-hour averages for the levels below. Do not directly compare an instantaneous peak with this table, and do not wait for an average before moving away from suspected exposure. [1]
| H₂S / NH₃ in air | Prevention message |
|---|---|
| H₂S: 0.07 to 1 ppm AND NH₃: below 8.3 ppm | Inform the public; vulnerable people should move away from affected areas. |
| H₂S: 1 to 5 ppm AND NH₃: below 8.3 ppm | Everyone should move away from affected areas. |
| H₂S: above 5 ppm OR NH₃: above 8.3 ppm | Avoid access to at-risk areas and exposure downwind of emissions. |
References: [1]
The 2023 opinion adds recommendations without re-examining these thresholds. This table is neither a guarantee of safety below the first reference level nor a beach rating. Authorities also consider exposure duration, the people concerned and local conditions. Infants, pregnant women and people with certain respiratory conditions require particular attention. [8]
At work: different limits and different durations
Occupational exposure limits concern workers, not public access to a beach. The French values below are binding. The European reference values shown are indicative; France notably uses lower limits for ammonia. The associated durations are essential when comparing them. [9][10][6]
| Gas and framework | 8-hour average | 15-minute short-term |
|---|---|---|
| H₂S · France | 5 ppm | 10 ppm |
| H₂S · EU (indicative) | 5 ppm | 10 ppm |
| NH₃ · France | 10 ppm | 20 ppm |
| NH₃ · EU (indicative) | 20 ppm | 50 ppm |
These numbers are not a green light to start collecting seaweed. A worksite needs a risk assessment, an organised approach, trained people and suitable equipment. DEETS provides a guide for exposed workers. For residents, the right response is not to improvise an intervention based on this table, but to follow local instructions. [11]
Observe without putting yourself at risk
Respect access restrictions and check local information from health authorities, the prefecture and monitoring organisations. Stay away from accumulations and emissions; do not move closer to smell or photograph them. Seek medical advice if you develop symptoms. Severe breathing difficulty or feeling faint warrants a call to the emergency services: in French territories, call 15 or 112. [12][13]
This is where SargaTrack fits in: connecting coastal observations with available monitoring information without confusing the two. You can consult reports and, from a safe place, share a dated, located observation. A photograph does not measure H₂S, NH₃ or contaminants in leachate. Validated measurements and instructions from the authorities remain essential. [14]
At SargaTrack, we believe in simple actions: sharing an observation, checking a source, helping someone understand a bulletin. Our observations make more sense together, alongside the people who experience the coast every day.
Better informed, together.
Understanding a bulletin, finding an observation, staying connected to your coast: SargaTrack supports this community watch. Explore the map at your own pace. Your safety always comes before a report.
Sources and references
Want to check a point or explore further? These are the documents used, consulted on 5 October 2026. For current instructions, refer to local authorities.
- HCSP · Opinion of 8 June 2018, pages 6 and 11–12 (PDF in French)
- INRS · Hydrogen sulphide, characteristics (FT 32, in French)
- INRS · Ammonia, toxicology (FT 16, in French)
- BRGM · Characterisation of storage sites in Martinique (2020)
- Anses · Assessment of decomposing sargassum (2017, PDF in French)
- European Union · Directive 2009/161/EU, annex and definitions (French text)
- INRS · Hydrogen sulphide, exposure limits and measurements (FT 32, in French)
- HCSP · Additional recommendations of 7 September 2023 (PDF in French)
- French Labour Code · Article R4412-149, version of 10 April 2026 (in French)
- INRS · Ammonia, French and European exposure limits (FT 16, in French)
- DEETS Martinique · Guide to protecting workers (2025 update, in French)
- Martinique Prefecture · Public health recommendations (in French)
- Service-Public · Emergency numbers (in French)
- SargaTrack · Observations and monitoring information


